The control panel on the Omega Race cabinet was in pretty rough shape. Several of the bolts were missing, leaving holes in the panel and a larger section of the lower left hand corner was torn off.

I recently acquired a control panel in a ltitle better shape and decided to install it tonight. Along with switching the panel itself, I swapped the buttons from the old control panel onto the new and used a few of the old leaf switches from Track & Field on the new control panel. The Track & Field leaf switches were in much better shape. As you can see in the picture below, all of the bolts are intact and there isn’t a huge chunk of the overlay missing.

Finally, the game didn’t have an on/off switch so I had to plug it in and unplug it to power it on and off. I purchased a temporary switch and installed it while I had part of the cabinet dismantled. I’ll replace the switch with a more fitting one when I can find one.